Acom 1500 User Manual page 22

You can proceed in one of two directions:
a) You can use the OFF LINE information screens and control functions. They refer to the
auto-protection signatures list, Display brightness control, as well as the AUTO-OPERATE
feature and Antenna assignment. This is described in Section
b) You can turn on the amplifier and start the warm-up sequence. After 3 minutes you may tune
and begin operating the amplifier and you can use the ON LINE information screens or
control functions (see Section
Page 22 of 52 | S e c t i o n POWER ON, CONTROLS AND INDICATORS
User's Manual | ACOM 1500 | HF + 6 m Linear Amplifier
).
4 OPERATION
.
5 OFF LINE MODE
August 2021