Figure 3-2 Information Screens And Control Functions Structure - Acom 1500 User Manual

User's Manual | ACOM 1500 | HF + 6 m Linear Amplifier
If the characters on the fluorescent display (VFD type - obsolete since 2015) are dim,
please, see Section
OLED display).
The control of the amplifier is accessible during OFF LINE and ON LINE states, each having several
information screens and control functions (see

Figure 3-2 Information screens and control functions structure

S. 3
S. 5
S. 5.1
S. 5.2
S. 5.3
Figure 3-2 Information screens and control functions structure
The OPER button alternatively switches OPERATE and STANDBY modes while ON LINE (see Section
4.2 Changing OPERATE and STANDBY Modes
5.2 Auto-Operate Enabling and Disabling
Section
5.4 Reading Auto-protection Signatures
The PREV and NEXT buttons change information screens or select control functions for both OFF LINE and
ON LINE states (see Section
The POWER button alternatively switches OFF LINE and ON LINE states of the amplifier.
August 2021
5.1 Display Brightness Control
Figure 3-2 Information screens and control functions structure
S. 4.1
S. 5.4
). Please, note that AUTO-OPERATE might be enabled (see Section
). The OPER button activates signature list while OFF LINE (see
).
4.6 ON LINE Information Screens and Control Functions
S e c t i o n POWER ON, CONTROLS AND INDICATORS | Page 21 of 52
(not operative in units furnished with
S. 4
S. 4.6 S. 4.4
).
):
S. 4.3