Digital Clock Setting; Backlight Brightness Adjustment - Honda CRF450X 2020 Owner's Manual & Competition Handbook

Digital Clock Setting

The digital clock shows the hour and minute. To
adjust the time format and clock, proceed as
follows:
1. Starting the engine.
2. Press SEL button to select the odometer or
current fuel mileage.
Odometer: Current fuel mileage:
or
3. Press and hold SEL button until the current
time format start flashing.
4. Press SEL button to select "12 hr" or "24 hr".
5. Press and hold SEL button. The time format is
set, and then the display moves to the clock
setting.
6. Press SEL button until the desired hour is
displayed.
7. Press and hold SEL button. The minute digits
start flashing.
8. Press SEL button until the desired minute is
displayed.
9. Press and hold SEL button. The clock is set,
and then the display moves to the backlight
brightness adjustment.
The established setting can also be set by stopping
the engine.
The control is automatically switched from the
setting mode to the normal mode if the button is
not pressed for about 30 seconds. Even in this case,
established setting is maintained.
Indicators & Displays

Backlight Brightness Adjustment

To adjust the backlight brightness, proceed as
follows:
1. Refer to Digital Clock on previous step.
2. Press SEL button. The brightness is switched.
3. Press and hold SEL button. The backlight is
set, and then the display moves the changing of
the speed and mileage unit.
The established setting can also be set by stopping
the engine.
The control is automatically switched from the
setting mode to the normal mode if the button is
not pressed for about 30 seconds. Even in this case,
established setting is maintained.
Instruments & Controls
13