Multi-Function Display - Honda CRF450X 2020 Owner's Manual & Competition Handbook

Indicators & Displays
1 SEL button
2 PGM-FI (Programmed Fuel
Injection) malfunction indicator
lamp (MIL)
3

Multi-function display

Speedometer
Digital clock
Odometer
Tripmeter A & B
Fuel mileage meter
4 Fuel reserve indicator
5 Neutral indicator
10
Instruments & Controls
Uses this button for the following purposes.
• To change the 12/24 hour
• To adjust time
• To adjust display illumination
• To select and reset the fuel mileage meter
• To change the mileage units for the odometer/tripmeter and available
driving distance
• To select and reset the tripmeter
Lights when there is any abnormality in the PGM-FI (Programmed Fuel
Injection) system. When starting the engine, the MIL (amber) will stay on for
2 seconds and then go off. This is normal. If the indicator comes on at any
other time, reduce speed and take your motorcycle to your dealer as soon
as possible. Lamp Check.
The display includes the following functions. Display check.
Shows riding speed in miles or kilometers per hour (page 12).
Shows hour and minute (page 13).
Shows accumulated mileage (page 12).
Shows the number of miles or kilometers ridden since you last reset the
meter (page 12).
Shows current fuel mileage, average fuel mileage, or fuel consumption
(page 12).
When this indicator comes on while riding, fuel reserved in the tank is about:
0.58 US gal (2.2 ℓ)
Lamp Check.
Lights when the transmission is in neutral.

Multi-function Display

The multi-function display includes the following
functions:
speedometer
odometer
tripmeter A & B
fuel mileage meter
digital clock
The digital clock will reset if the battery is
disconnected.
(2)(3)(4)
(1)
(5)
(1) speedometer
(2) odometer
(3) tripmeter
(4) fuel mileage meter
(5) digital clock