Digital Clock - Honda GOLDWING GL1800/A 2015 Owner's Manual

Multi Information Display

Digital Clock

(Models not equipped with Navigation System)
The display shows the hour and minute.
To adjust the time:
1. Turn the ignition switch to ON or ACC.
2. Push the SETUP button once. ''CLOCK ADJUST'' will display.
3. To set the hour, press and release the INFO button until the desired hour
appears.
• Quick setting — push and hold the INFO button until the desired hour
4. To set the minute, press and release the TRIP button until the desired minute
appears.
• Quick setting — push and hold the TRIP button until the desired minute
5. Once the time is selected, push the SETUP button to enter the time.
When approximately 5 seconds pass without operating a button on the CLOCK
ADJUST display, the display automatically returns to the previous display.
Be sure to push the SETUP button to enter your adjusted time in the system.
SETUP button
(Models equipped with Navigation System)
The navigation system receives signals from the Global Positioning System
(GPS) and automatically sets the time display based on the time zone you select.
You may also set the time manually using the ''Other'' option. Refer to the
Navigation System Manual.
30
Instruments & Controls
appears.
appears.
INFO button TRIP button