Removing & Installing Body Components; Battery - Honda CBR250RR 2021 Owner's Manual

Removing & Installing Body Components

Battery

Battery holder
Battery
Positive terminal
#
Removal
Make sure the ignition switch is in the OFF
position.
Remove the front seat.
1.
Remove the bolt.
2.
Bolt
Negative terminal
P. 66
2
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from
4.
the battery.
Remove the battery taking care not to
5.
drop the terminal nuts.
Pull out the battery and battery holder
u
together from vehicle.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 20
2
P. 55
2
P. 90
2
65