Honda CBR250RR 2021 Owner's Manual page 27

Setting Mode B
1 Setting of REV indicators:
You can change the setting of the REV
indicators.
You can set each value of the blinking RPM
with ,
mode. The order of setting is
, and
To change the setting mode B, turn the
a
ignition switch to the ON position while
pressing button until the display check
SEL
is finished. The blinking of bar segment in
the tachometer shows the currently applied
blinking RPM, and the numerical tachometer
display shows it. At the same time, all of the
REV indicators and
and
,
mode.
mode blink.
button
SEL
Tachometer
Numerical
button
tachometer display
SET
REV indicators
mode
Continued
23