CDVI SD300M Quick Manual

2 3
PRODUCT PRESENTATION
500
Monitored
Surface Mount
High corrosion resistance
Delivered with armature plate
No mechanical wear
No residual magnetism
Ease of installation
Recommended for interior use
Fail safe (Door unlocked when power off)
Holding force: 2 x 300 kg
Built-in varistor: Built-in electronic protection to
eliminate back EMF
Dimensions (L x W x D): 496 x 45 x 27 mm
Armature plate dimensions (L x W x D): 185 x 38 x 11 mm
Power supply: 12-24V dc
Consumption: 960 mA @ 12V dc
480 mA @ 24V dc
WEEE & RoHS EC certification
PACKAGE CONTENT
Magnetic lock Armature plate
1 2
9
185x38x11mm
Allen Key Steel Rubber Rubber washer M8x35 Screw
1 4
185
ELECTRICAL CONNECTIONS
2 3
12V dc Default setup
Terminal
Correspondence
37,9
block
+
12 or 24V dc
- 0V
N.C NC (Normally closed)
COM COM
N.O NO (Normally open)
The NO/NC signal only switches when
the door is closed with the power to it on.
IMPORTANT NOTE
- Check the jumper position before connecting
the lock to the input current. A wrong position
could damage the lock. This type of damage
Ce document est la propritété exclusive de CDVI, il ne peut être communiqué à des tiers sans son autorisation.
This document is the exclusive property of CDVI and it may not be disclosed to others without permission.
is not covered by the warranty.
C.A. :
- Make sure that the magnet and the armature S0101DT-SDD300001
meet evenly over their entire mating surfaces.
S0101DT-SDG300001
SD300M-SD500M Board
The Armature plate must be able to pivot
slightly about its center mounting screw
With LED Left and Right
to compensate for any door misalignment.
Material : ...
General tolerance:
3
DES: W.Sainvil
Vol. (mm ) :
CDVI FRANCE + EXPORT CDVI UK
31, av. du Général Leclerc [UNITED KINGDOM - IRE-
93500 PANTIN - France LAND]
Phone +33 (0)1 48 91 01 02 Phone +44 (0)1628 531300
www.cdvi.com www.cdvi.co.uk
CDVI SWEDEN CDVI AMERICAS
[SWEDEN - DENMARK - [CANADA - USA]
NORWAY FINLAND] Phone +1 (450) 682 7945
Phone +46 (0)31 760 19 30 www.cdvi.ca
www.cdvi.se
Manufacturing Access Control since 1985
SD300M
4 5
2 x 300 kg Double Surface Electromagnetic Lock
504
IP42
Fixing plate Security Rope 5x16 Roll pin
1 2
M8x25 Screw
2 2
4 5
Voltage selection jumpers
12V dc
Recommended power supplies
Voltage Voltage
SCALE 1:1
12V
A4V
24V 24V
0.2 Surface condition: Ra 3,2
Weight (g) :
CDVI BENELUX
[BELGIUM - NETHERLAND -
LUXEMBOURG]
Phone +32 (0) 56 73 93 00
www.cdvibenelux.com
CDVI SUISSE
Phone +41 (0)21 882 18 41
www.cdvi.ch
6 7
Fixing plate
10
Wood screw
Maglock
500x25x5mm
YEAR
Roll pin
WARRANTY
504x45x26mm
Rubber washer
Steel washer Steel washer
Cap nut Cap nut
4x25 Wood
4X10 Screw
screw
4 1
Cap nut Manual
2 2
6 7
37,9
24V dc
Plan M2952
Edition 00
Date 10/03/2021
ADC335 ADC612S
Project :
ADC324 ADC624S
31, av du Gal Leclerc
93691 PANTIN CEDEX
F R A N C E
Tel : 33(0)148910102
Fax : 33(0)148912121
CDVI IBÉRICA
www.cdvi.com
[SPAIN - PORTUGAL]
Phone +34 (0)935 390 966
www.cdviberica.com
CDVI ITALIA
Phone +39 0321 90 573
Fax: +39 0321 90 8018
www.cdvi.it
8 9
MOUNTING RECOMMENDATIONS
14
Ce document est la propritété exclusive de CDVI, il ne peut être communiqué à des tiers sans son autorisation.
This document is the exclusive property of CDVI and it may not be disclosed to others without permission.
CA: F0526000010-A
Armature plate
- It is vital to fix the electromagnetic lock and SD300M
1
armature plate solidly on their supports.
Surface mount electromagnetic lock - 2x300kg
- Make sure that the magnet and the armature
Material : General tolerance: 0.2 Surface condition: Ra 3,2
meet evenly over their entire mating surfaces.
3
DES.: W. Sainvil
Vol. (mm ) :
- The armature plate must be able to pivot slightly
8 9
about its center mounting screw to compensate
for any door misalignment.
Security ropes
The security rope
Throughout its life, the magnetic lock is subject to an
accumulation of repeated shocks and stresses at the
fixing points on the frame, frequencies of opening/
closing, (attempt to open a locked door and attempts
at vandalism) which can cause it to become detached
from the support when it is opened. In order to avoid
the risk of the electronic lock block falling, install the
two safety cables supplied to guarantee the safety of
the users (see diagram above).
CDVI TAIWAN
Phone +886 (0)42471 2188
www.cdvichina.cn
CDVI CHINA
Phone +86 10 84606132/82
www.cdvichina.cn
CDVI MAROC
Phone +212 5 2248 0940
www.cdvi.ma
EN
10 11 12
M8 screw
Armature plate
Plan M2930
Edition 00
SCALE 1:2
Date 09/02/2021
A2 Project :
31, av du Gal Leclerc
93691 PANTIN CEDEX
F R A N C E
Tel : 33(0)148910102
Fax : 33(0)148912121
Weight (g) :
www.cdvi.com
10 11 12
CDVI POLSKA
Phone +48 12 659 23 44
www.cdvi.com.pl
CDVI GERMANY
+49 (0) 175 2932 901
www.cdvi.de
www.cdvi.com