Page 2
The electromagnetic lock installed on emergency exits must be in accordance with the fire approval department (Ex: In France = NF 61-937). For more information, contact CDVI, the local fire officer or the safety officer responsible for the building.. * Depending on the version.
® lock is recommended for use with power supplies manufactured by CDVI, however, other power supplies may be used on condition that they are of equivalent quality and characteristics rectified, filtered, regulated and protected by fuse in primary and secondary sectors.
Page 5
INSTALLATION MANUAL V1ER - V3E - V3ER - V3E35R - V4E - V4ER - V5E Mortice Electromagnetic locks WITH BUILT-IN PCB BOARD DIRECT CONNECTION 12V DC VOLTAGE SELECTION White JUMPERS Green 12V dc 24V dc Black 24V DC White Green...
INSTALLATION MANUAL V1ER - V3E - V3ER - V3E35R - V4E - V4ER - V5E Mortice Electromagnetic locks 7] FAULT FINDING PROBLEM POSSIBLE CAUSE SOLUTION - Check that the wires are connected to the right terminals. Door locking The lock is not receiving - Check that the power supply is compatible.
Need help?
Do you have a question about the V3E and is the answer not in the manual?
Questions and answers