Nikon Z fc N2016 Reference Manual page 611

Bluetooth and Wi-Fi (wireless LAN)
This product is controlled by the United States Export Administration
Regulations (EAR). The permission of the United States government is
not required for export to countries other than the following, which as
of this writing are subject to embargo or special controls: Cuba, Iran,
North Korea, Sudan, and Syria (list subject to change).
The use of wireless devices may be prohibited in some countries or
regions. Contact a Nikon-authorized service representative before using
the wireless features of this product outside the country of purchase.
The Bluetooth transmitter in this device operates in the 2.4 GHz band.
Notice for customers in the U.S.A. and Canada
●
This device complies with part 15 of FCC Rules and Innovation, Science
and Economic Development Canada's licence-exempt RSSs. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC WARNING
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Nikon Corporation may void the user's authority to operate the
equipment.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed
down through the MAC, through the digital and analog baseband, and
finally to the RF chip. Several special packets are initiated by the MAC.
These are the only ways the digital baseband portion will turn on the RF
transmitter, which it then turns off at the end of the packet. Therefore,
the transmitter will be on only while one of the aforementioned packets
is being transmitted. In other words, this device automatically
Bluetooth and Wi-Fi (wireless LAN)
611