Nikon Z fc N2016 Reference Manual page 158

4
Position the white balance target ( r ) over a white or gray object
and measure a value for preset manual white balance.
･ Position the target ( r ) using the multi selector.
･ To measure white balance, press the shutter-release button all the
way down or press J.
･ You can also position the target and measure white balance by
tapping the display.
･ You cannot move r if an optional flash unit is attached. Frame the
shot so that the white or gray reference object is in the center of
the display.
･ If the camera is unable to measure white balance, a message will
be displayed and the camera will return to direct measurement
mode. Try measuring white balance again, for example with the
target ( r ) positioned over a different area of the subject.
5
Press the i button to exit direct measurement mode.
Still images
158