Nikon Z fc N2016 Reference Manual page 579

Lasers and other bright light sources
●
Do not direct lasers or other extremely bright light sources toward the lens,
as this could damage the camera's image sensor.
Cleaning
●
When cleaning the camera body, use a blower to gently remove dust and lint,
then wipe gently with a soft, dry cloth. After using the camera at the beach or
seaside, wipe off any sand or salt using a cloth lightly dampened in fresh
water and then dry the camera thoroughly.
Cleaning the lens and viewfinder
●
These glass elements are easily damaged: remove dust and lint with a blower.
If using an aerosol blower, keep the can vertical to prevent the discharge of
liquid that could damage glass elements. To remove fingerprints and other
stains from the lens, apply a small amount of lens cleaner to a soft cloth and
wipe the lens carefully.
Do not touch the image sensor
●
Under no circumstances should you exert pressure on the image sensor, poke
it with cleaning tools, or subject it to powerful air currents from a blower.
These actions could scratch or otherwise damage the sensor.
Cleaning the image sensor
●
For information on cleaning the image sensor, see "Manual cleaning" (0575).
The lens contacts
●
Keep the lens contacts clean. Avoid touching them with your fingers.
Caring for the camera and battery: Cautions
579