Table of Contents
Advertisement
･ Download the latest NX Studio installer from the website below and
follow the on-screen instructions to complete installation.
https://downloadcenter.nikonimglib.com/
･ Note that you may be unable to download pictures from the camera
using earlier versions of NX Studio.
Copying pictures to a computer using NX
Studio
See online help for detailed instructions.
1
Connect the camera to the computer.
After turning the camera off and ensuring that a memory card is
inserted, connect the USB cable as shown. You also have the option
of inserting the camera memory card into the computer's card slot
(if available) or a third-party card reader. Before doing so, check that
the card is compatible with the reader or card slot.
2
Turn the camera on.
･ The Nikon Transfer 2 component of NX Studio will start. Nikon
Transfer 2 is image transfer software that is installed when you
install NX Studio.
･ If a message is displayed prompting you to choose a program,
select Nikon Transfer 2.
･ If Nikon Transfer 2 does not start automatically, launch NX Studio
and click the "Import" icon.
Connecting to computers via USB
490
Advertisement
Table of Contents
Troubleshooting
