CRANE SPECIFICATIONS BOOM WIRE ROPE - Non-rotating 3/4"(19mm) P・S(19)+39xP・7 Min. Four section full power synchronized telescoping boom, Breaking Strength 72,765lbs 39.4'~154.2' (12.0m~47.0m), of round box construction HOOK BLOCKS with five sheaves, 17-5/16" (0.44m) root diameter, at boom head. The synchronization system consists of two telescope cylinders, 100+(90.7 metric ton)-8sheaves with swivel hook and safety latch,for an extension cable and retraction cable.
Page 3
Tadano electronic LOAD MOMENT INDICATOR system TADANO AML-C monitors outrigger extended length and (AML-C) including: automatically programs the corresponding "RATED LIFTING Control lever lockout function with audible and visual CAPACITIES" table pre-warning Boom position indicator Operator's right hand console includes transmission gear Outrigger state indicator selector and sight level bubble.
Page 13
GR-1000XL RATED LIFTING CAPACITIES (IN POUNDS) ON OUTRIGGERS MIN EXTENDED 8' 10-1/4"(2.8m) SPREAD ROTATION 39.4' 53.7' 68.1'(20.75m) 82.4'(25.13m) 96.8'(29.5m) 111.1'(33.88m) 125.5'(38.25m) 139.8'(42.63m) 154.2' C (12m) C (16.38m) C (47m) 143900 102700 94900 93000 90200 40100 66900 65200 63700 40100 44700 43400 42000 40100...
Page 14
1. RATED LIFTING CAPACITIES apply only to the machine as 9. When boom length is between values listed, refer to the originally manufactured and normally equipped by TADANO rated lifting capacities of the next longer and next shorter LTD. Modifications to the machine or use of optional booms for the same radius.
Page 16
WARNING AND OPERATING INSTRUCTIONS FOR ON RUBBER LIFTING CAPACITIES 1.Rated lifting capacities on rubber are in pounds and do not exceed 6 Over front operation shall be performed within two degrees in front of 75 % of tipping loads as determined by SAE J765-Crane Stability chassis.
Page 17
MEMO TADANO AMERICA CORPORATION 333 NORTHPARK CENTRAL DRIVE, SUITE Z HOUSTON, TEXAS 77073, U.S.A. PHONE: (281) 869-0030 FAX: (281) 869-0040 http://www.tadano-cranes.com/ Form No. GR-1000-2-00101...