Electrolux EGD6576NOK User Manual page 10

Hide thumbs Also See for EGD6576NOK:
Table of Contents

Advertisement

10
www.electrolux.com
Turning the burner off
To put the flame out, turn the knob to the
off position
4.2 Induction cooking zones
Activating and deactivating
Touch
deactivate the hob.
Automatic Switch Off
The function deactivates the hob
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after
you activate the hob.
• You spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• The hob gets too hot (e.g. when, a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• You use incorrect cookware. The
symbol
zone deactivates automatically after 2
minutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
deactivates. See below.
The relation between heat setting and
times of the function:
, 1 - 2— 6 hours
• 3 - 4 — 5 hours
• 5 — 4 hours
• 6 - 9 — 1.5 hours
.
WARNING!
Always turn the flame down
or switch it off before you
remove the pans from the
burner.
for 1 second to activate or
comes on and the cooking
comes on and the hob
The heat setting
Touch
to increase the heat setting.
Touch
to decrease the heat setting.
Touch
and
at the same time to
deactivate the cooking zone.
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
(
Immediately touch
Immediately touch
heat setting comes on. After 3 seconds
comes on.
To deactivate the function: touch
Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
To activate the function for a cooking
zone: touch
.
To deactivate the function: touch
.
Timer
Count Down Timer
You can use this function to set how long
the cooking zone operates for only this
one time.
First set the cooking zone then set the
function. You can set the heat setting
before or after you set the function.
comes on).
(
comes on).
until the correct
.
comes on.
or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents