Advertisement
3
3
Hose Installation
Snap clip (1) onto hose (2). Be sure clip is oriented as shown. Attach hose (2) by firmly
pushing onto valve shank (3) until it clicks.
Note: To remove the hose, it must be pulled from the sprayer end of the spout to avoid
lodging the large nut in the spout tube.
Instalación de la Manguera
Installation du tuyau souple
1
3
2
7
1
Cold
Fría
Froide
Make Connections to Water Lines
Spread the tubes (1) to desired position by grabbing near
the top of the tubes. WARNING: Kinked tubes will void the
warranty. Make connections to water lines. Use 1/2" IPS
faucet connections (A), or use the supplied coupling nuts (2)
with 3/8" O.D. ball-nose risers (B). Important: When making
connections be sure to use two wrenches when tightening.
Do not overtighten.
Note: The hose will expand with water pressure. It is normal for
a few drops of water to exit the sprayer after the valve is off as
the hose contracts.
1
Hot
Caliente
Chaude
2
50113
Rev. B
Advertisement
