Control Cabinet PC
NOTICE
The IndraControl VPB 40.3 device may be used only as intended and with the ac-
cessories, mounting parts and other components specified in this documenta-
tion. Components that are not expressly mentioned must neither be attached
nor connected. The same applies to cables and lines.
Operation must only be carried out with the hardware component configura-
tions and combinations that are expressly specified and with the software and
firmware indicated and specified in the respective documentation and functional
descriptions.
Typical areas of application of the control cabinet PC IndraControl VPB 40.3:
Handling systems and assembly systems
●
Food processing machinery and packaging machines
●
Printing machines and paper converting machines
●
Machine tools
●
Wood working machines
●
The IndraControl VPB 40.3 device may only be operated under the assembly and
installation conditions, in the position of application and under the ambient con-
ditions (temperature, degree of protection, humidity, EMC, etc.) specified in this
documentation.
5 Spare parts, accessories and wear parts
5.1 Y-repeater
Connecting unit to connect two operator displays featuring the same resolution
and the same version to one control cabinet PC.
Ordering code
VAC01.1S-YD1-NNNN
5.2 External 24 V power supply unit
External 24 V power supply unit for IndraControl V-devices.
Ordering code
VAP01.1H-W23-024-010-NN
DOK-SUPPL*-VPB*40.3***-IT05-EN-P
Spare parts, accessories and wear parts
Danger of destruction of the device if not ex-
pressly stated accessories, mounting parts and
other components, cables, lines, software and
firmware are used.
Part number
Description
R911171187
Y-repeater for CDI interface
Part number
Description
R911171065
External 24 V power supply unit for
IndraControl V-devices
Bosch Rexroth AG
5/57