Installing The Chassis In The Rack - Nokia Alcatel-Lucent OmniSwitch 6360 Hardware User's Manual

Rack-Mounting

Installing the Chassis In the Rack

1 Mark the holes on the rack where the chassis is to be installed.
2
One person should lift and position the chassis until the rack-mount flanges are flush with the
rack post.
3 Align the holes in the flanges with the rack holes marked in step 1.
4
Once the holes are aligned, the second person should insert a screw through the bottom hole on each
flange. Tighten both screws until they are secure.
5 Install the remaining screws in the top hole of each flange. Be sure that all screws are
securely tightened.
page 3-26
Chassis and Power Supplies
OmniSwitch 6360 Hardware Users Guide April 2021