Mounting the Switch
Airflow Considerations
To ensure proper airflow, be sure that your switch is placed in a clean, well-ventilated area free of dust and
debris and provide minimum recommended clearance at the front, back and sides of the switch.
Never obstruct chassis air vents.
Note. Clearance is not required at the top and bottom of the chassis.
Mounting the Switch
For information on mounting the switches, refer to the
page 2-4
Chassis Top View
Chapter 3, "Chassis and Power Supplies."
OmniSwitch 6360 Hardware Users Guide
Getting Started
}
Rear. 6 inches minimum
at rear of chassis.
Sides. 2 inches minimum
at left and right sides.
}
Front. 6 inches minimum
at front of chassis.
April 2021