Page 4
Remove the battery pack before starting any work on the machine. click 75-100 % 50-75 % 25-50 % 0-25 %...
Page 6
Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece. 0 - 54 mm...
Page 7
START For safety reasons this power tool is fitted with a switch lock and the On-/Off switch cannot be locked in the "On" position. STOP 0° ... 45°...
Page 8
Accessory Carry out a test cut ø 26 mm 0° 45° x cm...
Page 9
If a correction of the 90° angle of the guide-plate to the saw blade is necessary, use the correction screw. 0° 90°...
Page 13
Wear ear protectors! whatever is in its path. Be aware of the time it takes for the blade please contact one of our AEG service agents (see our list of to stop after switch is released. Total vibration values (vector sum in the three axes) determined guarantee/service addresses).
Page 14
. a e g - p t . c o m AEG Elektrowerkzeuge Max-Eyth-Straße 10 D-71364 Winnenden Germany...