Qualified Personnel - Siemens SIPROTEC easy 7SJ45 Manual

Manual 7SJ45
These operating instructions are included in the scope of
delivery. They cannot, however, deal with every detail of all
versions of the product described, nor with all possible cases of
erection, operation or maintenance.
If you wish any further information, or if you are faced with special
problems that this booklet does not deal with in sufficient detail,
please feel free to contact our hotline for any questions that you
might have.
E-Mail: Services@ptd.siemens.de
Phone: +49 (1805) 247000
Fax: +49 (1805) 242471
We should also like to point out that the contents of this product
documentation are not part of any earlier or currently existing
agreement or legal relationship, nor apt to modify such an
agreement or relationship. All obligations incurred by Siemens
result from the purchase contract, which also contains the
complete and solely applicable warranty regulations. Contractual
warranty regulations are neither extended nor restricted by the
contents of this documentation.
C53000-K1174-C001-7
WARNING!
Hazardous voltages are present in this electrical equipment during
operation. Non–observance of the safety rules can result in severe
personal injury or property damage.
Only qualified personnel shall work on and around this equipment. The
successful and safe operation of this device is dependent on proper
handling, storage, installation, operation, and maintenance.

2.2.1 Qualified personnel

are those persons who are qualified to set up, install, place into
service, and operate this device, and who possess the following
qualifications:
•
Training and instruction (or other qualification) for switching,
grounding and designating devices and systems in accordan-
ce with safety standards.
•
Training or instruction in accordance with safety standards for
care and use of certain safety equipment.
•
First aid training.
General information
44