More Guides; Do Not Disturb; Setting Vibration Strength; Turning The Screen On And Off - Huawei Band 6 User Manual

More guides

Do Not Disturb

Swipe down on the device's home screen and touch
Alternatively, enter the app list, go to Settings > Do Not Disturb, and schedule a period for
this mode.
After Do Not Disturb is enabled:
The device will not vibrate to notify you of incoming calls or notifications, and the
•
Raise to wake feature will be disabled.
The alarm will vibrate and ring as normal.
•

Setting vibration strength

On the watch, go to Settings > Strength, then select your preferred vibration strength level,
such as Strong, Soft, or None. Your watch will then automatically return to the previous
screen.

Turning the screen on and off

Using Raise to wake: Open the Huawei Health app, go to the device settings screen, enable
or disable Raise to wake.
Adjusting the screen brightness level: On your watch, go to Settings > Display >
Brightness, and set your preferred screen brightness level.
Setting Always on Display: On your watch, go to Settings > Display > Advanced, and set
the screen on time to 5 min, 10 min, 15 min, or 20 min. After it is set, swipe down on the
home screen of the watch, touch
you set.
Setting Sleep time: On your watch, go to Settings > Display > Advanced and set the screen
sleep time to 10 sec, 15 sec, or 20 sec. If Sleep is set to Auto, the watch screen will turn off
when you tilt or lower your wrist.
If you turn the screen back on within 10 seconds of it turning off, the previous screen will
be displayed. Otherwise, the home screen will be displayed.

Setting time and language

After you have synced data between your device and the phone, your phone's system
language will be synced to your device as well.
to enable Do Not Disturb.
. The screen will then stay on for the amount of time
16