Controlling Music Playback; Remote Shutter - Huawei Band 6 User Manual

Ensure that the watch and the phone are properly connected, your phone is powered
•
on, and the Huawei Health app is running in the background.
The Find Phone feature will ring the phone for 10 seconds and the watch will prompt
•
you with a message reading Stopped ringing if no operation is performed. The
watches screen will then turn off after 30 seconds.

Controlling music playback

Controlling music playback is only supported on phones running Android 6.0 or later.
•
You can use your watch to control music playback with third-party music apps on your
•
phone including NetEase Music.
1
Open the Huawei Health app, go to the device settings screen, touch Music, and enable
Control phone music.
2
After you play a song on your phone and swipe on the watch face screen, you can find the
music playback control screen. You can pause, resume, and switch the music being played.

Remote shutter

1
Connect the device with your phone and make sure that the Huawei Health app is
running in the background.
2
On the device, enter the app list, and select Remote shutter. This will open the Camera
app on your phone at the same time.
3
Touch the camera icon on the screen to take a photo. Swipe right on the screen or press
the side button to close the Remote shutter app.
This feature is only available on Huawei and Honor phones running EMUI 8.1 or
•
later.
Handy features
15