Use; Maintenance - CAMPAGNOLA LIPO 550 Use And Maintenance Manual

• Do not use the tool when you are in unstable position or off balance.
• It is forbidden to operate the tool on ladders.
• Before any routine maintenance operations, read the use and maintenance manual carefully. For any
maintenance operation which is not indicated in this manual, please contact one of the Manufacturer
Authorised Service Points.
• Use the tool just for the purposes indicated in ch. "Product description". Any other kind of use may cause
injuries.
• Store this manual carefully and read it before any tool use.
• Keep all the stickers with the safety indications in perfect conditions.
• Avoid working in bad weather conditions, such as fog, heavy rain or strong winds.
2.3

Use

The unit shall be strictly used for the purposes described in par. „Product Description‟. Other uses could
•
cause injuries and/or damages.
•
Carry out a complete recharging cycle before using the battery unit (2) for the first time in the working
season.
•
Before re-charging the batteries (1), switch the ON-OFF selector (8) off (position 0) and put the shear into
its holster (39) with closed blades (17).
•
Do not leave the unit in the rain. Store it in a dry place.
•
Do not leave the battery unit (12) under the sun rays. Do not expose it to microwaves sources. It shall not
be subject to hits or high pressure. Do not put it into the water or keep it in a humid place. Keep it away
from heat sources (>60°C) and flammable stuff.
•
Do not use a battery-charger which is different from the one supplied by the Manufacturer, since it could
cause serious damages to the tool and injuries to the operator. In case of doubt, check if the battery-
charger model is one of those listed in par. 3.6.
•
Do not open the battery unit (2) or the corresponding battery-charger. In case of problems, do not use the
component and immediately carry the unit to a Campagnola Authorised Service Point for a reparation or a
replacement.
•
Do not remove the 'Garanzia/Warranty' label for any reason, otherwise the warranty becomes void.
•
It is recommended that the same operator does not use the unit for a long time per day. Two operators
should alternate hour by hour. A continuous use can make the operator very tired.
2.4

Maintenance

WARNING!
Before performing any maintenance operations or adjustments on the mechanical parts of the
equipment, put on heavy-duty work shoes, protective gloves and goggles.
• Routine maintenance and repairs can be carried out only by an operator with the necessary physical and
intellectual qualifications.
• Special maintenance and repairs can be carried out only by a qualified mechanic.
• Before any maintenance or adjustment operations, disconnect the tool from its power source.
• Keep bystanders away when servicing or repairing the machine.
• Only qualified mechanics are authorised to inactivate the safety devices provided on the machine when
maintenance is to be performed. It is their responsibility to safeguard the operators and the machine. The
safety devices should be activated as soon as maintenance work has been completed.
• All maintenance procedures not dealt with in this manual are to be performed at the Manufacturer‟s
Authorised Service Points.
• When maintenance or repairs have been completed, the machine can be started again only if duly
authorised by a qualified mechanic. The service mechanic must make sure:
- work has been completed;
- the machine runs in a trouble-free manner;
- the safety devices are activated;
no one is working on the machine.
-
Campagnola Srl – USE AND MAINTENANCE MANUAL – Translation of the original Instructions
Rev.: 02, Date: 03/11/2016
Pag.25