The user can define the limit line position by the following ways
The soft keyboard to enter digital value
►
The hard keyboard to enter digital value
►
Touch screen directly with touch pen to move and define the location
►
Up and down arrow key of hard keyboard to fine adjust and define the
►
location
After the location of the limit line is determined, users need to confirm the
operation (soft keyboard "Enter" key or hard keyboard "OK" key).
Users can also enable the limit line alarm function. If this function is enabled,
once the measurement data exceeds the limit line, limit line color will turn red
(the default is green).
April 2016
Limit setting menu
Figure 10.:
16