Table of Contents
Advertisement
Function
menu 2
Main
display
area
3.4
The function menu description
3.4.1
Marker
In all five measurement mode users can use mark function. The user click
"marker" menu, new mark menu will appear on the right side of screen.
The system supports 5 marker lines (M1, M2, M3, M4, M5), each marker can be
independent turn on/off and edited. The user can also close all markers.
The user clicks on "MX", the MX marker automatically is activated. The status will
be shown on the top status bar. Users click on the "Edit" menu, the edit menu
will show on the left side of the main display area.
13
RL/SWR: fast switching between the return loss and VSWR
measurement.
Marker: For details see later chapter.
Limit: For details see later chapter.
Scale: For details see later chapter.
Smooth/Average: turn on/off Smooth/Average function.
User can utilize these function to observe and analyze
measurement dat.
File: For details see later chapter.
Display the measurement results and other information.
Figure 6.
April 2016
Advertisement
Table of Contents
