Installation Recommendations; Uneven Installation Surfaces - Miele DA 2360 Operating And Installation Instructions

Installation

Installation recommendations

– Please be aware that if positioned too
high, extraction will be inefficient.
– To achieve optimum vapour
extraction, the cooker hood must be
centred over the hob, not to the side
or behind it.
– The hob should be no wider than the
cooker hood, and if possible, it
should be narrower.
– The installation area must be easily
accessible. The cooker hood should
be easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the cooker hood.
28

Uneven installation surfaces

If the installation surface is uneven
making flush installation difficult, the
frame can be realigned.
 Fit the cooker hood as described on
the installation sheet.
 Disconnect the cooker hood from the
mains electrical supply (see "Warning
and Safety instructions").
 Insert the lever supplied into the gap
between the lamp and the lamp
holder.
The lamp will then drop downwards.
 Grip the lamp, turn it anti-clockwise
and take it out.
 Remove all other lamps in the same
way.