Panasonic KX-TDE100 Configuration Manual page 12

Essential PBX Configuration:
To Assign the DID numbers destinations, Go to 10-3.CO & Incoming Call
Please locate your DID information in the Cbeyond Install Profile under the Trunk
Group Information section
Important note:
Make sure that you provide the 10 digits DID number in the DID number field to be able to
make use of the additional DID's assigned by the Provider.
SIP trunks Activation keys:
1- The DSP card installed onto the PBX MPR Card has preinstalled number of SIP
trunks activation keys (DSP4 and DSP16 have 4 IP trunks and DSP64 has 16 IP
trunks)
2- To obtain additional activation keys, you need to purchase the appropriate
activation key codes (For IP Trunks) and access the Key Management System. You
can download the activation keys as an activation key file from the Key
Management System. To download the activation keys, enter the MPR ID number
shown on the IPCMPR Card in the PBX, and activation key number and registration
ID provided on each activation key code.
3- To check the Number of Activation Keys Installed into your system
Go to 1- Configuration, 1-Slot, click on Activation Keys (Top of the PBX image)
2/4/2010
Rev2
DID table
12