Reassembly Process - Alcatel One touch 930D Repair Document

L2 Repair Document
Disassembly Notice:
Put all the spare parts on right position (don't let all spare parts mixed and put on the clean place to avoid
vitiated or stained for each spare part) after disassembly. When taking apart of LCD module, take care not
to dirty or damage it.

4.4 Reassembly Process

Please make reference to the disassembly process for assembly reverse an order of the disassembly
steps.
Attention: Insert main FPC and assembly main PCBA with furnished keypad casing, lock the main FPC
connector to PCBA connector, and then place the volume key, Assembly the furnished frame. Note the
orientations of the main FPC.
4.5 Disassembly process evaluation
We list the one touch 930D parts disassembly time, technique levels and disassembly methods as below,
for technique levels, Class 1 signifies easy to disassembly, Class 2 signifies normal to disassembly and
Class 3 signifies hard to disassembly.
Spare part
battery cover
Furnished casing with
screws
Main PCBA
Volume key
Speaker
Main Camera
volume keypad FPC
Power key FPC
Receiver
RF cable
Sub PCBA
Touch lens
LCD Module
BTB connector socket
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
By NCK Team
Time for
disassembly disassembly
3s Plastic Flake
20s screwdriver
20s Plastic Flake
3S
3s Tweezers
5s Plastic flake
15s Soldering iron
15S Soldering iron
3s
3s
10s Plastic flake
Hot wind gun
300s
Plastic Flake
Hot wind gun
60s
Plastic Flake
Hot wind gun
60s
Tweezers
one touch 930D Level 2 Repair Document
TCT
Jigs for Difficulty
Class
Class 1
Class 1
Class 1
Tweezers Class 1
Class 1
Class 1
Class 2
Class 2
Tweezers Class 1
Tweezers Class 1
Class 1
Class 3
Class 3
Class3
Mobile Limited
Remark
Be careful for
touch lens & FPC
damage
Be careful for
LCD FPC damage
The connector is
easy to be
damaged
Page
22/33