Disassembly Notice; Reassembly Process - Alcatel 5085Y Repair Document

L2 Repair Document
12 Audio Jack Rubber
13 MIC Rubber
14 Screw
15 Front Flash Furnished FPC
16 Coin Vibrator
17 Receiver
18 Speaker
19 Main Camera
20 Front Camera
21 Battery
22 Battery PET

4.4 Disassembly Notice:

1). Receiver and Speaker easily to be damaged during disassembly process. Thus please do not
disassemble them unless they are necessary.
2). About battery disassemble notice:
 The battery can be re-used after disassembly if it is normal.
 Improper operation on battery will cause high risk for fire or burning. Thus please follow up the
battery disassembly guidance strictly and pay high attention to the WARNING part. Do not
disassemble battery unless it is necessary.
3). Put all the spare parts on right position (don't let all the spare parts mixed and put on the clean place to
avoid vitiated or stained for each spare part) after disassembly.

4.5 Reassembly process

Please make reference to the disassembly process for assembly reverse an order of the disassembly
steps.
Attention:
 When assembling Main PCBA, make sure the Side Key Furnished FPC, Receiver, Front Flash
Furnished FPC, MIC Rubber, P-Sensor Rubber, Audio Jack Rubber and Front Camera connected
firstly.
 When assembling Sub PCBA, make sure the MIC Rubber and Coin Vibrator connected firstly.
 The battery can be re-used after disassembly if it is normal.
 When assembling battery, make sure that the battery does not be damaged, leaked or deformed
throughout the process.
Rev.
1.3
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
5085Y/D/A/B/J/Q/I/N/H Level 2 Repair Document
TCL
Communication Ltd.
Page
26/41