L2 Repair Document
Inner packing is anti-static bag
Put commercial label on anti-vibration bag
3、
Packing Requirements
i.
Please pay attention to the following points when different models put into one box:
ii.
Stick up the same models with tapes
iii.
Mark the model, quantity and specification of custom label on tape
iv.
The packing box for PCBA should have marking sticker and well sealed by the tape
v.
with TCL logo
vi.
Finally put all the packing boxes into packing cases strong enough and post to HK.
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
By NCK Team
one touch 930D Level 2 Repair Document
TCT
Outer packing is anti-vibration bag
Mobile Limited
Custom
label is
easy to
see
Page
31/33