ClearCube I8440 Quick Start Manual page 2

6. Connect a monitor to the VGA port on the rear of the
I8440.
7. Connect the power cord (included with the I8440) to the
AC socket on the rear of the thin client, and then plug the
power cord into an AC power outlet.
8. Power on the thin client by gently pressing the power
button on the front of the I8440.
Making OS-Level Changes
I844x-series thin clients provide an Enhanced Write Filter
(EWF) to enable administrators to easily apply and remove
OS-level changes to the thin client. To make OS-level
changes you must:
• Log in as administrator.
• Commit changes from the EWF manager.
Log in as administrator
1. From the Windows XPe desktop, click Start > Log Off to
display the Log Off Windows dialog box.
2. Simultaneously press and hold the SHIFT key and click
Log Off to display the Log In screen.
3. Log in as user administrator and type the password
Administrator.
Commit changes from EWF manager
1. Ensure you are logged in as the administrator user. From the
Windows XPe desktop, click Start > Control Panel >
Administrative Tools > EWF manager.
2. Select Commit in the Commit Writes portion of the
screen.
3. Click Yes and then follow the prompts to restart the thin
client.
ClearCube Technology 8834 Capital of Texas Hwy N Austin, Texas 78759
See support.clearcube.com
information:
• Sentral User's Guide describes how to use ClearCube
Sentral to manage thin client connection brokering.
• XLmanage Installation Guide and XLmanage User's
Guide describe how to perform basic I8440
configuration and administration tasks.
Making BIOS-Level Changes
You must enter a password to access the I8440 BIOS. Press
the DELETE key after powering on the thin client (before
the operating system starts) to enter the BIOS. When the
BIOS password is requested, enter drupad.
Email: support@clearcube.com
Web site: support.clearcube.com
Toll-free: (866) 652-3400
Phone: (512) 652-3400
WEEE Disposal Guidelines
In the European Union, this electronic
product falls under the European Directive
(2002/96/EC) WEEE. When it reaches the
end of its useful life or is no longer wanted,
do not discard with conventional waste, but
disposed of at an approved designated
recycling or treatment facility.
Check with your local authorities for proper
disposal instructions.
For assistance, contact ClearCube at
recycle@clearcube.com
voice 512 652 3500 www.clearcube.com
for the following additional
RoHS
G0200115 Rev C