Advertisement
3. Assembly SOP
Preparation before assemble
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipment, material as bellow:
1) Working table
2) Screw-driver
3) Glove
4) Cleaning cloth
ESD protection
Item
1
2
Picture
Operation
1. Assemble MYLAR with
SHEET STIFFENER
2. Assemble G-Sync
module, Heat Sink
Module and SHEET
STIFFENER, then, fix
them by captive screw*4
3. Lock 4 Heat Sink Screws
1. Assemble G-SYNC
Module with I/F BD and
fix it by screw*4
2. Insert Fan Cable into I/F
BD
- 11 -
Tools
Notes
Screw
driver
(Screw
Torque-
Captive
Screw:
2-
2.5
kgf)
Screw
Torque-
Heat Sink:
4-4.5 kgf)
Screw
driver
(Screw
Torque: 4-
4.5 kgf)
Advertisement
