Table of Contents
Advertisement
Enabling a wireless network connection
The machine can be connected to your wireless network.
a
Press
to display the settings screen.
b
Display page 12 by pressing
c
Set [Wireless LAN Enable] to [ON].
The machine prepares for wireless connection.
■ Requirements for a wireless network
connection
The wireless network connection complies with IEEE
802.11 b/g/n standards and uses the 2.4 GHz frequency.
Memo
• A wireless network cannot be set up with WPA/
WPA2 Enterprise.
Using the wizard to set up the wireless
network connection
There are multiple ways to set up the wireless network
connection. We recommend the method that uses the wizard
on this machine.
In order to connect your machine to a wireless
a
network, the security information (SSID and network
key) for your home network will be required. The
network key may also be called a password, security
key or encryption key. Check your security
information, and write it in the space below.
SSID
Network key (password)
Memo
• The wireless network connection cannot be set up
if you do not have the security information.
• How to find the security information
1 Check the manual provided with your home
network.
2 The default SSID may be the manufacturer's
name or the model name.
3 If you cannot find the security information,
contact the manufacturer of the router, your
network administrator or your Internet provider.
4 Some SSIDs and network keys (passwords) may
be case sensitive.
b
/
.
c
d
Wireless Network Connection Functions
Press
beside [Wireless LAN Setup Wizard].
A list of available SSIDs appears.
Select the SSID that was noted.
The screen for entering the network key (password)
appears.
Memo
• When displaying next or previous pages, press
or
key to search the SSID that was noted.
• If the desired SSID is not listed, specify it as
described below.
1 Press
in the end of the SSID list.
2 Enter the desired SSID, and then press
3 Select the authentication method and encryption
mode.
• If using a previous connection, press
and then select the saved SSID.
Enter the network key (password) that was noted, and
then press
.
1
2
3
4
1 Text input area
2 Character keys
3 Caps key
4 Space key
5 Letters/numbers/symbols key
6 Cursor keys (Move the cursor to the left or right.)
7 Backspace key (Deletes the character at the cursor's
position.)
1
.
,
7
6
5
21
Advertisement
Table of Contents
