Adjusting Input Sensitivity For Operation Keys; Wireless Network Connection Functions; Operations Available With A Wireless Network Connection - Baby Lock Vesta BLMVE Instruction And Reference Manual

Wireless Network Connection Functions

Adjusting input sensitivity for operation keys

You can adjust the sensitivity of the operation keys to 5 levels.
Display the settings screen to set desired level.
a Press to display the settings screen.
Display page 10 by pressing
b
Press [Start].
c
d Adjust the [Input Sensitivity] by pressing
• The higher the setting, the more sensitive the keys
will be. The default setting is [3].
• We recommend selecting the highest setting if an
electrostatic touch pen is being used.
• While adjusting the input sensitivity, press
check whether the key responds.
When the key responds, the setting value indicating
the sensitivity blinks.
e Press to return to previous screen.
■ If the machine does not respond when an
operation key is pressed
Turn machine off, then hold down
button) and turn on the machine to reset [Input
Sensitivity]. Display the settings screen, and then adjust
the [Input Sensitivity] again.
20
/ .
This machine supports a wireless network connection. The
following useful operations will be available if the machine is
connected to a wireless network.
/ .
to
(Thread cutter
Wireless Network Connection
Functions
Operations available with a wireless
network connection
Note
• Connect the machine and your computer to the
same network.
• Wirelessly transfer an embroidery pattern from your
computer to the machine by using the dedicated
Windows application (Design Database Transfer).
The application can be downloaded from the
following URL.
https://www.babylock.com/accessories/software/
design-database-transfer
* Settings must be specified in Design Database
Transfer. For more information, refer to the manual
for Design Database Transfer.
• Wirelessly transfer to the machine an embroidery
pattern edited with embroidery editing software
(Palette version 11 or later) on a computer. Also,
transfer to Palette an embroidery pattern edited on
the machine.
* Settings must be specified in Palette. For more
information, refer to the manual for Palette.