Sharp AR-SS2 Service Manual page 23

D. Staple sort mode
When the staple mode is set, stapling is automatically performed after
sorting the copies.
1) The same operations as the sort mode are performed and all
copied papers are discharged to the bins.
↓
↓
↓
↓
↓
↓
2) The guide bar oscillates.
↓
Discharged paper
↓
↓
↓
3) The guide bar aligns the paper.
The stapler unit is shifted to the stapling position.
At the same time, the paper holding arm holds discharged
paper.
↓
↓
↓
↓
↓
Stapler unit
Discharged paper
Paper holding arm
4) The stapler unit staples the paper.
↓
5) The guide bar, the paper holding arm, and the stapler unit are
separated from the paper.
↓
6) The bin is shifted by one.
↓
↓
↓
↓
↓
7) Procedures 3 to 6 are repeated for all paper in the bins, and the
operation is completed.
Note: The staple sort mode is valid only when the RADF is used. In
the book mode, the staple sort mode can be set, but automatic
stanpling cannot be performed.
Paper
Bin
Bin supporting arm
9 – 4
AR-SS2
Paper holding arm