9 ] Operational Descriptions - Sharp AR-SS2 Service Manual

AR-SS2
[9] OPERATIONAL DESCRIPTIONS
1. Outline
This machine performs sorting and stapling of copy paper according
to the operation mode set by the copier.
Stapling is made also by the operation of the keys on this machine.
There are following four operation modes;
1. Non-sort mode
2. Sot mode
3. Group mode
4. Staple sort mode
Non-sort mode (10 black/white sheets)
Copier resist
Paper exit sensor
Transport motor
Bin shift motor
Lead cam sensor
Bin lower limit sensor
Guide bar oscillation motor
Guide bar HP motor
Parrallel section HIGH
Pin HP LOW
Forward rotation
Transport (Transport)
Alignment (Alignment)
Shift (Up)
Staple oscillation (Shifted to the stapling position.)
Staple (Staple)
2. Details
The basic operations in each mode are described below.
A. Non-sort mode
If the sort/group mode is not set, all copy paper is discharged to the
1st bin.
1) Press the copy start key of the copier.
↓
2) Copy paper is discharged to the 1st bin.
↓
↓
↓
↓
↓
↓
↓
↓
↓
3) Copying of the set quantity is completed.
↓
4) Discharging of the set quantity is completed and the operation
is completed.
Reverse rotation
Transport
Alignment
Shift
Staple oscillation
Staple
•
Sort mode (B/W, color): Discharged from the 2nd bin.
The other modes: Discharged from the 1st bin.
9 – 1
(Not)
(Save)
(Down)
(Shifted to HP.)
(Staple jam reset)