Sharp AR-SS2 Service Manual page 21

B. Sort mode
When the sort mode is set, alignment of copy pages is automatically
performed.
Black/white mode
1) Press the copy start key of the copier.
↓
2) The guide bar is oscillated from the paper exit center to the half
of the paper size +8mm.
↓
Copy paper exit direction
↓
↓
↓
3) Every time paper is discharged, the guide bar oscillates to
press the paper to the regulation plate to align paper and the
bin is shifted by one.
↓
Discharged copy paper
When the number of copy sets is 1 to 19, copies are discharged
from the 2nd bin.
When the number of copy sets is 20, copies are discharged from
the1st bin.
Sort mode (black/white, 2 originals, 3 copies)
Paper exit sensor
Lead cam sensor
Bin lower limit sensor
Guide bar oscillation motor
Guide bar HP motor
Sort mode (color, 2 originals, 3 copies)
Paper exit sensor
Transport motor
Lead cam sensor
Bin lower limit sensor
Guide bar oscillation motor
Guide bar HP motor
Color mode
Guide bar
Copier resist
Transport motor
Bin shift motor
Copier resist
Bin shift motor
B/W mode
4) Copying of the specified quantity is completed.
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
5) The original is changed and reverse sorting is performed.
↓
↓
↓
↓
↓
↓
↓
6) The operation is repeated until all the originals are completed.
7) After completion of copying, the guide bar returns to the home
position.
8) When copying is stopped, the bin which is not closed isshifted.
9 – 2
AR-SS2
Color mode
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓