Sharp AR-SS2 Service Manual page 22

AR-SS2
C. Group mode
When the group mode is set, the copies of an original set are dis-
charged to one bin.
1) Press the copy start key of the copier.
↓
2) The guide bar is oscillated from the paper exit center to the half
of paper size +6mm.
↓
Copy paper exit direction
↓
Paper exit center
↓
↓
↓
↓
3) Every time paper is discharged, the guide bar oscillates to
press the paper to the regulation plate to align paper and the
bin is shifted by one.
↓
Discharged copy paper
↓
↓
↓
↓
4) Copying of the specified quantity is completed.
↓
Group mode (black/white, 3 originals, 2 copies)
Copier resist
Paper exit sensor
Transport motor
Bin shift motor
Lead cam sensor
Bin lower limit sensor
Guide bar oscillation motor
Guide bar HP motor
Bin
Guide bar
6mm
Paper size
9 – 3
5) The original is changed and the bin is shifted by one.
↓
↓
↓
↓
↓
↓
6) The operation is repeated until all the originals are completed.
↓
7) After completion of copying, the guide bar returns to the home
position.
Copies are loaded from the 1st bin to the 20th bin sequentially.
When the original exceeds 20 pages, loading is returned to the1st
bin without reverse sorting.