Climate Control Panel, Audio Panel, Instrument Panel, Console Panel, Switches, Combination Meter, And Other Plastic Surfaces; Navigation Monitor (If Equipped) - Subaru Outback 2011 Owner's Manual

10-6
Appearance care
or detergent and water, after first vacuum-
ing or brushing away loose dirt. Allow the
soap to soak in for a few minutes and wipe
off with a clean, damp cloth. Commercial
foam-type cleaners suitable for synthetic
leather materials may be used when
necessary.
NOTE
Strong cleaning agents such as sol-
vents, paint thinners, window cleaner
or fuel must never be used on leather
or synthetic interior materials.
& Climate control panel, audio
panel, instrument panel,
console panel, switches,
combination meter, and other
plastic surfaces
Use a soft, damp cloth to clean the climate
control panel, audio equipment, instru-
ment panel, center console, combination
meter panel, and switches.
NOTE
Do not use organic solvents such as
paint thinners or fuel, or strong clean-
ing agents that contain those solvents.
& Navigation monitor (if
equipped)
To clean the navigation monitor, wipe it
with a silicone cloth or with a soft cloth. If
the navigation monitor is extremely dirty,
clean it with a soft cloth moistened with
neutral detergent then carefully wipe off
any remaining detergent.
NOTE
. Do not spray neutral detergent di-
rectly onto the monitor. Doing so could
damage the monitor's components.
. Do not wipe the monitor with a hard
cloth. Doing so could scratch the
monitor.
. Do not use cleaning fluid that con-
tains thinner, fuel, or any other volatile
substance. Such cleaning fluid could
erase the lettering on the switches at
the bottom of the monitor.