Advertisement
11
12
13
1. Assemble Rear Cover to
Middle Frame
2. Lock 4 RC screws and 2 RC
base screws to fix Rear Cover
1. Insert the stand base blocks
fully into the stand slot
2. Lift the screw handle and turn
the screw clockwise
3. After tightening the screw, fold
the screw handle flat within
the recess
Attach the stand assembly to the
monitor:
a. Fit the two tabs on the upper
part of the stand to the groove on
the back of the monitor
b. Press the stand down till it
snaps into place
- 20 -
Screw-
driver
Torsion
RC screw:
9±1 kg
Torsion
RC base
Screw:
4.5±0.5kg
Advertisement
