Thermokon JOY Fancoil EC 3AO RS485 Modbus Datasheet

Fancoil EC 3AO RS485 Modbus
JOY
Electronic Fan Coil Thermostat (Flush mounting)
Datasheet
Subject to technical alteration
Issue date: 24.11.2017 • A002
A
pplication
Modern design, flush mounting fan coil room thermostat. Used for individual control of temperature in commercial, industrial and
residential buildings. It is tailored for two-pipe and four-pipe fan coil units with two-wire electric valves or controlling a 6-way valve
(Sauter or Belimo). The device combines a modern design with a 2,5" LCD and a touch-sensitive surface, 3 time program
options each with 4 time periods options.
S ecurity Advice – Caution
The installation and assembly of electrical equipment should only be performed by authorized personnel.
The product should only be used for the intended application. Unauthorised modifications are prohibited! The
product must not be used in relation with any equipment that in case of a failure may threaten, directly or indirectly,
human health or life or result in danger to human beings, animals or assets. Ensure all power is disconnected
before installing. Do not connect to live/operating equipment.
Please comply with

Local laws, health & safety regulations, technical standards and regulations

Condition of the device at the time of installation, to ensure safe installation

This data sheet and installation manual
Thermokon Sensortechnik GmbH, Platanenweg 1, 35756 Mittenaar, Germany · tel: +49 2778 6960-0 · fax:-400 ·
JOY_Fancoil_EC_3AO_Modbus_Datasheet_v1.6.0+_en.docx © 2017
www.thermokon.com · email@thermokon.de