Table of Contents
Advertisement
4. Tighten the three captive screws that secure the base cover to the palm-rest and keyboard assembly.
5. Replace the six screws (M2.5x7) that secure the base cover to the palm-rest and keyboard assembly.
6. Replace the screw (M2x4) that secures the base cover to the palm-rest and keyboard assembly.
Procedure for computers that are shipped with optical drive
1. Connect the battery cable to the system board and adhere the tape that secures the battery cable to the connector on the system
board, if applicable.
Removing and installing components
17
Advertisement
Table of Contents
