Advertisement
li nd ab | w e s im pli fy c on st r u ct i o n
Premax
2.0 Commissioning
2.1 Product labeling
Fig.1: Label location exterior (water connection) Fig.2: Label location interior (battery end).
On the label you'll find:
–
Order: Order identification number.
–
Pos: Order position.
–
Product: Product configuration.
–
Project: Project name.
–
Mark: Marking noted on order.
–
Nozzles: Number of nozzles.
–
Plugs: Number of plugged nozzles.
–
Product ID: Product number.
–
Sign: To be signed when checked and commissioned on site.
2.2 Measure air pressure and calculating the airflow.
Before calculating the airflow, the static nozzle pressure must first be measured. The
static nozzle pressure is the air pressure available at the nozzles.
2.2.1 Measure the static nozzle pressure.
–
To measure the air pressure, a manometer, analog or digital (such as the Lindab
PC410) will be needed.
–
Insert the measuring tube onto the specialized measuring nozzle
–
Read off the static nozzle pressure from the manometer
We reserve the right to make changes
7
Advertisement
