Sony PlayStation DualSense CFI-ZDS1 Instruction Manual

DualSense™ Charging Station /
DualSense™充電座 / DualSense™充电座
Instruction Manual / 使用說明書 / 使用说明书
CFI-ZDS1
5-022-420-11(2)
EN
Precautions
Before using this product, carefully read this manual and any manuals for compatible
hardware. Retain instructions for future reference.
Safety
Only use the AC adaptor and AC power cord included with the product. Other types may
ˎ
cause fire, electrical shock or malfunction.
Do not connect the AC power cord to a voltage transformer or inverter. Connecting the AC
ˎ
power cord to a voltage transformer for overseas travel or an inverter for use in an
automobile may cause heat to build up in the AC adaptor and may cause burns or a
malfunction.
Unplug the AC power cord from the electrical outlet before cleaning or when you do not
ˎ
intend to use the product for an extended period of time.
Keep the product out of the reach of small children. Small children may swallow small
ˎ
parts or may wrap the cables around themselves, which may inflict injury or cause an
accident or a malfunction.
Use and handling
Do not swing the charging station, AC adaptor or the AC power cord around by their
ˎ
cables.
Do not allow liquid or small particles to get into the product. If this happens, stop use and
ˎ
disconnect it from the electrical outlet immediately.
Do not touch the product with wet hands.
ˎ
Do not throw or drop the product or subject it to strong physical shock.
ˎ
Do not stand on or put objects on the product.
ˎ
Do not touch the ports or insert any foreign objects into the product.
ˎ
Do not let any other metal items come into contact with the connectors.
ˎ
Never disassemble or modify the product.
ˎ
Do not place this product on an unstable surface or leave on the floor.
ˎ
The product and its parts are made from metal and plastic materials. When disposing of
ˎ
the product, follow local regulations for the proper disposal of such materials.
Cleaning
Follow the instructions below to help prevent the product exterior from deteriorating or
becoming discoloured.
Wipe with a soft, dry cloth.
ˎ
Do not apply insecticides or other volatile substances.
ˎ
Do not place any rubber or vinyl materials on the product exterior for an extended period
ˎ
of time.
Do not use solvents or other chemicals. Do not wipe with a chemically-treated cleaning
ˎ
cloth.
If you see dust or foreign objects on the connectors, wipe them with a dry cloth before
ˎ
connecting.
Storage conditions
Do not expose the product to high temperatures, high humidity or direct sunlight during
ˎ
operation, transportation and storage.
Do not leave the product in a car with the windows closed, particularly in hot weather.
ˎ
Do not expose the product to dust, smoke or steam.
ˎ
Charging
1
Connect the supplied AC power cord to the supplied AC adaptor. Then, connect
the AC adaptor to the DC IN connector on the charging station.
Make all connections before plugging in the AC power cord into an electrical outlet.
DC IN connector
AC power cord
To an electrical
outlet
AC adaptor
2
Attach the wireless controller to the charging station.
Align the charging terminals on the controller with the charging connector on the
charging station. Press down on the controller until it clicks. The light bar on the
controller slowly blinks orange while the controller charges. When the controller finishes
charging, the light bar turns off.
Light bar
Charging terminals
Charging connector
To remove the controller
Lift the controller out of the charging station to remove it.
Charging time
It takes approximately 3 hours to charge the controller when the battery has no remaining
charge.
Specifications
Ratings
Charging Station input 5.1 V
ˎ
AC adaptor input 100-240 V 0.4 A
ˎ
50/60 Hz
output 5.1 V 2.8 A
External dimensions Approx. 52 x 62 x 159 mm (w × h × d)
Mass Approx. 180 g
Operating temperature 5 °C to 35 °C
Design and specifications are subject to change without notice.
CT
使用前須知事項
使用本產品前，請先詳細閱讀本使用說明書和對應裝置的所有說明書，並妥善保存，以備將來
參考之用。
關於安全
ˎ 請使用本產品隨附的交流電轉換器與交流電源線。使用其他非指定的交流電轉換器，可能導
致火災、觸電或故障。
ˎ 請勿將交流電源線插入變壓器或反相器。將交流電源線插入海外旅行者使用的變壓器或汽車
專用的反相器，可能會導致交流電轉換器發熱，並造成灼傷或故障。
清潔前或當您打算長時間不使用本產品時，請自電源插座中拔出交流電源線。
ˎ
請將本產品放在兒童拿不到的地方保管。兒童可能會吞下細小零件或用連接線纏繞自己，而
ˎ
造成身體損傷或導致意外發生、機器故障。
使用與保管
ˎ 請勿揮動充電座、交流電轉換器或交流電源線。
請勿讓液體或小顆粒掉入本產品中。遇此情形時，請停止使用本產品，並立即從電源插座拔
ˎ
除連接線。
請勿用濕手觸摸本產品。
ˎ
ˎ 請勿投擲或掉落本產品，或使其受到強烈的外力撞擊。
ˎ 請勿在本產品上站立或放置重物。
ˎ 請勿觸摸連接埠或將任何異物插入本產品中。
ˎ 請勿讓金屬物品碰觸連接端子部位。
ˎ 切勿分解、改造本產品。
ˎ 請勿將本產品放置於不平穩的表面或放置在地面上。
ˎ 本產品乃以金屬或塑膠等物料製成。請遵從當地法律，廢棄本產品時請正確處理。
清潔
請遵循以下使用說明，以免產品外殼變形或變色。
ˎ 使用乾燥軟布輕柔擦拭。
ˎ 請勿使用殺蟲劑或其他具揮發性的物質。
ˎ 切勿在產品外殼上長時間放置任何橡膠或乙烯基材質。
ˎ 切勿使用溶劑或其他化學藥劑。切勿使用經化學處理的擦布擦拭。
ˎ 如有灰塵或異物堆積於端子四周，連接前請使用乾擦布擦拭。
保管條件
操作、運輸及保管過程中，請勿將本產品放在高溫、濕氣極重或受日光直射的地方。
ˎ
炎熱天氣下請勿將本產品放在窗戶密閉的車內。
ˎ
請勿將本產品暴露在灰塵、煙霧或蒸氣中。
ˎ
充電
1
連接隨附的交流電源線與隨附的交流電轉換器。接著將交流電轉換器插入充電座的
DC IN端子。
完成所有連接後，再將交流電源線的插頭插上電源插座。
DC IN端子
交流電源線
至電源插座
交流電轉換器
2
將無線控制器裝設於充電座上。
請將控制器的充電用端子對準充電座的充電用端子。壓下控制器直至發出喀嚓聲。當控制
器的光條緩慢閃爍橘色，即表示控制器正在充電。控制器充電完成時，光條會熄滅。
光條
充電用端子
充電用端子
拔除控制器時
請往上拉起控制器，自充電座拔除。
充電時間
電池電力耗盡的狀態下，控制器大約需3小時完成充電。
規格
額定電壓／額定輸入電流
ˎ 充電座 輸入 5.1 V
交流電轉換器 輸入 100-240 V 0.4 A
ˎ
50/60 Hz
輸出 5.1 V 2.8 A
外觀尺寸 約52 × 62 × 159 mm （寬×高×深）
重量 約180 g
操作溫度 5 ℃～35 ℃
本公司保留在沒有事先通知情況下，變更設計或規格之權利。
限用物質含有情況標示表
商品中的有害物質名稱及含量
設備名稱： CHARGING STATION 充電座，型號（型式）： CFI-ZDS1
限用物質及其化學符號
單元
鉛 汞 鎘 六價鉻 多溴聯苯
(Pb) (Hg) (Cd) (Cr +6 ) (PBB)
印刷電路板 － ○ ○ ○ ○
外殼 － ○ ○ ○ ○
配件 （交流電轉接器等）
－ ○ ○ ○ ○
支架
－ ○ ○ ○ ○
電源插座 （DC Jack）
－ ○ ○ ○ ○
備考1. "超出0.1 wt %"及"超出0.01 wt %"係指限用物質之百分比含量超出百分比含量基準值。
備考2. "○"係指該項限用物質之百分比含量未超出百分比含量基準值。
備考3. "－"係指該項限用物質為排除項目。
多溴二苯醚
(PBDE)
○
○
○
○
○