Front Body Pillar (Cut) - Toyota ZZW30 Series Repair Manual

BP-38

FRONT BODY PILLAR (CUT)

REPLACEMENT
1. REMOVE FRONT FENDER APRON LOWER GUSSET (See page BP-36)
2. REMOVE FRONT BODY PILLAR
(a) Cut and join the parts at the location as shown below.
(b) Heat the brazed area of the roof panel, and scrape off the brazing with a wire brush.
HINT:
Be careful not to overheat the roof panel.
mm in.
110 4.33
BODY PANEL REPLACEMENT
Braze
Cut with disc
sander, etc.
110 mm
Cut and Join
Location
[Cut and Join Location]
F10828A