Wireless Lan Specifications - Cisco RV110W Datasheet

Feature
Management
Performance

Wireless LAN Specifications

Table 2 gives the wireless specifications for the Cisco RV110W.
Table 2.
Features
WLAN hardware
Wireless Domain Services
(WDS)
Wi-Fi Multimedia (WMM)
Active WLAN clients
Service Set Identifiers (SSIDs)
Wireless isolation
WLAN security
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Description
● Simple Network Management Protocol (SNMP) v3
● Event logging: local, syslog, email alerts
● Firmware upgradable through web browser
● Imported/exported configuration in text format
● Simple browser-based configuration (HTTP/HTTPS)
● Bonjour and Universal Plug and Play (UPnP)
● Network diagnostics: Ping, Traceroute, and DNS Lookup
● NAT throughput: 90 Mbps
● 5000 concurrent sessions
● VPN throughput: 5Mbps
Wireless LAN Specifications
Description
● IEEE 802.11n standard-based access point with 802.11b/g compatibility
● Radio and modulation type:
● 802.11b: direct sequence spread spectrum (DSSS)
● 802.11g/n: orthogonal frequency division multiplexing (OFDM)
● 2 omnidirectional 1.8 dBi gain fixed external antennas
● Operating channels:
● 11 in North America
● 13 in most of Europe
● Automatic channel selection
● Transmit power:
● 802.11b: 17 dBm +/- 1.5 dBm
● 802.11g: 15 dBm +/- 1.5 dBm
● 802.11n: 12.5 dBm +/- 1.5 dBm
● Receiver sensitivity:
● -87 dBm at 11 Mbps
● -71 dBm at 54 Mbps
● -68 dBm at msc15, HT20 / -66dBm at mcs15, HT40
● Allows wireless signals to be repeated by up to 3 compatible devices
● WMM with QoS (802.11e), WMM power save (WMM-PS)
● Up to 32 clients
● Up to 4 separate wireless networks
● Wireless isolation between clients
● Wireless isolation between clients
● WPS ( Wi-Fi Protected Setup), Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA) personal
and enterprise, WPA2 personal and enterprise
Page 4 of 6