Admin > Save Configuration; Via Tftp; Via Http; Backup - Cisco SRW208 User Manual

Chapter 5
Cable Length
This is the approximate length of the cable.
The Cable Length test can be performed only when the
port is up and operating at 1Gbps.
Admin > Save Configuration
Admin > Save Configuration

Via TFTP

After you download a new image file, the device should
be rebooted. If you are downloading a new boot image,
please follow these steps:
1. Download the new boot code.
WARNING:
While inputting the boot code,
refrain from reseting the device.
2. Download the new software image.
3. Reset the device now.
Upgrade Select this option to upgrade the switch from a
file located on a TFTP server.
TFTP Server
The TFTP Server IP Address that contains
•
the source file to upgrade from.
Source File Specifies the name of the upgrade file on
•
the TFTP server.

Backup

To back up the switch configuration via TFTP,
enter the TFTP server address.
TFTP Server
Specifies the TFTP Server IP Address to
•
which the configuration file will be saved.
Destination File Specifies
•
configuration file. The default is StartupCfg.cfg.
8-Port 10/100 Ethernet Switch with Webview
the name of the
Advanced Configuration

Via HTTP

This HTTP Firmware Upgrade screen is used for saving
configuration information using your web browser.
Upgrade Select this option to upgrade the switch from a
file on the local hard drive.
Source File
Type in the name and path of the file or
•
click Browse to locate the upgrade file.
Backup
Proceed The Proceed button is used to backup the
configuration to the local hard drive.
Admin > Firmware Upgrade
Admin > FIrmware Upgrade
The Firmware Upgrade screen contains the following
fields:
via TFTP
Defines the upgrade through a TFTP Server.
via HTTP
Allows you to upgrade the firmware using your
Web browser.
Upgrade
Defines the screen functionality as a Firmware
upgrade.
Backup Defines the screen functionality as a Firmware
backup.
TFTP Server IP Address
Specifies the TFTP Server IP
Address from which files are downloaded.
Source File Name Specifies the file to be downloaded.
Destination File name Specifies the destination file
type to which to the file is downloaded. The possible field
values are:
Software Image
Downloads the image file.
Boot Code
Downloads the boot file.
55