Query; Admin > Dynamic Address; Admin > Logging - Cisco SRW208 User Manual

Chapter 5
Delete on Reset
The MAC address is deleted when
•
the device is reset.
Delete on Timeout
The MAC address is deleted when
•
a timeout occurs.
Secure The MAC Address is defined for locked ports.
•

Query

Port Specifies the interface for which the table is queried.
There are two interface types from which to select.
Port
The specific port number.
•
LAG
The specific LAG number.
•
MAC Address
Specifies the MAC address for which the
table is queried.
VLAN ID
Specifies the VLAN ID for which the table is
queried.
Address Table Sort Key Specifies the means by which
the Dynamic MAC Address Table is sorted. The address
table can be sorted by address, VLAN, or interface.
Admin > Dynamic Address
The Dynamic Address Table contains the MAC addresses
learned by monitoring the source address for traffic
entering the switch. When the destination address for
inbound traffic is found in the database, the packets
intended for that address are forwarded directly to the
associated port. Otherwise, the traffic is flooded to all
ports.
Admin > Dynamic Address
The Dynamic Address screen contains parameters for
querying information in the Dynamic MAC Address Table,
including the interface type, MAC addresses, VLAN, and
table storing. The Dynamic MAC Address table contains
information about the aging time before a dynamic MAC
8-Port 10/100 Ethernet Switch with Webview
Advanced Configuration
address is erased, and includes parameters for querying
and viewing the Dynamic MAC Address table. The Dynamic
MAC Address table contains address parameters by which
packets are directly forwarded to the ports. The Dynamic
Address Table can be sorted by interface, VLAN, and MAC
Address.
Address Aging Specifies the amount of time (in seconds)
the MAC address remains in the Dynamic MAC Address
table before it times out, if no traffic from the source is
detected. The default value is 300 seconds.
Clear Table If checked, clears the MAC address table.
Query
Port Specifies the interface for which the table is queried.
There are two interface types from which to select.
Port
The specific port number.
•
LAG
The specific LAG number.
•
MAC Address
Specifies the MAC address for which the
table is queried.
VLAN ID Specifies the VLAN ID for which the table is
queried.
Address Table Sort Key Specifies the means by which
the Dynamic MAC Address Table is sorted. The address
table can be sorted by address, VLAN, or interface.
Admin > Logging
The System Logs enable viewing device events in real
time, and recording the events for later usage. System
Logs record and manage events and report errors or
informational messages.
Admin > Logging
Event messages have a unique format, as per the
SYSLOG protocols recommended message format for
53