Raider RDP-HM03 User Manual page 10

10 www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure of the
nature following instructions can cause electric
shock, fire and / or severe injuries. Keep these
instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit.
Disarray and poor lighting may contribute to the
occurrence of an accident.
1.2. Do not operate in an environment where
the mixer with an increased risk of an explosion
in the vicinity of flammable liquids, gases or
powders.
During operation of the mixer can be separated
sparks that can ignite powders or fumes.
1.3. Keep children and bystanders at a safe
distance while working with the mixer.
If your attention is diverted, you may lose
control over the mixer.
2. Safety when working with electricity.
2.1. Plug of the mixer must be suitable
for contact. In no case is allowed to modify
the structure of the plug. When working with
electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the
risk of electric shock.
2.2. Avoid touching your body to earthed
bodies, eg. pipes,
refrigerators. When your body is grounded, risk
of electric shock is greater.
Protect your mixer from rain and moisture.
Penetration of water into the mixer increases
the risk of electric shock.
2.3. Do not use a power cord for the purposes
for which it is not provided, eg. to bear the mixer
for cable or removing the plug from the outlet.
Protect cords from heat, oil, contact with sharp
edges or points of mobile machines.
Damaged or twisted cables increase the risk
of electric shock.
2.4. When working with drill impact out, switch
the machine only in installations equipped with
electric switch Fi (safety shut-off switch with
Residual protection), and current leakage, which
is triggered when DTZ must be no more than 30
mA, according to "Regulation 3 device for the
electrical equipment and power lines. Use only
extension, suitable for outdoor use. Using the
extension, designed for outdoor use reduces the
risk of electric shock.
2.5. If you require the use of the mixer and
in moist environment, plug the machine only in
installations equipped with electric switch Fi. Use
of such a safety switch utechni currents reduces
heaters, stoves
the risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions
carefully and act cautiously and prudently. Do
not use the mixer, when you are tired or under
the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work mixer may
have the effect of extremely serious injuries.
3.2. Work with protective work clothing and
always with safety glasses.
Wearing suitable for drilling and the activities
of personal protective equipment, such as
respiratory masks, healthy, tightly closed shoes
grapple with a stable, protective helmet and
silencers (hearing protectors), reduces the risk
of accident.
3.3. Avoid the danger of incorporating the
mixer inadvertently. Before you turn the plug into
the power supply network, make sure the trigger
switch is in position "off". If, when you carry the
mixer, keep your finger on the trigger switch, or
if you submit a voltage of the mixer, where it is
included, there is the risk of accident.
3.4. Before you turn on the mixer, make sure
that you have removed all of her utilities and
wrenches.
Utilities, forgotten rotating unit can cause
and injuries.
3.5. Avoid unnatural positions of the body.
Work in a stable position of the body at any time
and keep the balance. So you can control the
mixer better and safer if unexpected situations
arise.
3.6. Work with appropriate clothing. Do not
operate with loose clothing or ornaments. Keep
your hair, clothes and gloves at a safe distance
from rotating units of the mixer. Robes, attire,
long hair can be caught and carried away by
chuck.
3.7. If possible use an external aspiration
system, make sure it is switched on and
functioning properly. Use of the aspiration
system reduces the risks due to the discharge
dust at work.
4. Care to drill to hit.
4.1. Do not overload the mixer. Use only the
mixer in accordance with its intended purpose.
Will operate better and safer when using the
appropriate mixer manufacturer in the specified
range of load.
4.2. Do not use mixer, whose starting switch
is damaged.
Mixer, which can not be excluded and included
as provided by the manufacturer, is dangerous